CT630 Stand

This stand is specially designed for the Creation CT630. It bolts directly to the bottom of the cutter to ensure clean feeding of vinyl. It enables you to change materials quickly without putting end caps on your rolls of vinyl. Made of Structured Aluminum with an industrial powder coated finish. It has adjustable ball bearing rollers and lockable casters.

Only $179 +$30 S/H

Cutter Protection Strip

Teflon cutter protection strip for CT630 & Ct635 Teflon strips should only need to be replaced every few years - unless you are cutting with too much pressure and cutting too deep.

Always change your blade holders yearly - they do travel a lot of miles.

Only $12 Each + $5 S/H

Standard Blade Holder & 3 Blades

The same blade holder that originally came with your CT630 vinyl cutter with 3 standard steel blades. Perfect everyday cutting of various vinyls. It should be replaced yearly or every 6 months for high volume cutting.

Only $80 Each + $5 S/H

Hold Down Roller

The pinch roller that holds down vinyl is easily replacable with one simple screw. For standard vinyls only two rollers are needed. You may added up to 14 rollers for holding down very thick materials that require a lot of holddown pressure such as sandblast resist.

Only $45 Each + $5 S/H

45 Degree Cement Tipped Carbide Blades

NEW ITEM -SEPT 2004 Designed for general overall cutting of a variety of materials, these blades are cement coated and made out of ultra fine grain tungsten carbide to ensure a very precise, sharp edge cut. These blades also typically last 3-5 times longer than other blades. (STANDARD BLADE HOLDER ONLY)

5 Pack -- Only $99 + $5 S/H

60 Degree Cement Tipped Carbide Blades

NEW ITEM -SEPT 2004 Designed for cutting of Thick Materials, Reflective Vinyls & Sandblast Vinyl; these blades are cement coated and made out of ultra fine grain tungsten carbide to ensure a very precise, sharp edge cut. These blades also typically last 3-5 times longer than other blades. (STANDARD BLADE HOLDER ONLY)

5 Pack -- Only $99 + $5 S/H

Vinyl Starter Kit

Avery A6 6 Year Vinyl
1 - 15" x 30ft Roll of Red
1 - 15" x 30ft Roll of White
1 - 15" x 30ft Roll of Blue
1 - 15" x 30ft Roll Black
1 - 6" x 300ft Roll of Transfer Tape
1 - vinyl squeegee

$105 + $15 shipping

Pro Vinyl Starter Kit

Avery A6 6 Year Vinyl
1 - 24" x 30ft Roll of Red
1 - 24" x 30ft Roll of White
1 - 15" x 30ft Roll of Blue
1 - 24" x 30ft Roll Black
1 - 6" x 300ft Roll of Transfer Tape
1 - vinyl squeegee

$135 + $15 shipping

VINYL GRAPHICS HOW-TO INSTRUCTION BOOK

More than 80 photos, many in step-by-step sequence, illustrate the techniques of properly registering, applying, repairing, reclaiming and removing vinyl graphics. Detailed captions and text as well as an updated vinyl products resource list make this a very comprehensive book. Larry Mitchell, the "Vinyl Graphics" columnist for Signs of the Times shows you how to make higher profits by applying vinyl graphics the right way.

Only $15 Each + $5 S/H